DAV-100 Data Fusion and Display This is the heart of the RacrEye system. It merges the signal from the video camera with the data to produce the combined picture. It also contains the audio processing and the user set-up and calibration serial port. For more details, see the FAQ section FAQ section.

Click picture for close up view

$599.00 Description RacrEye’s DAV-100 is the basic building block for a data augmented video recording system. It adds data from vehicle sensors, GPS and accelerometers to the in-car video for recording. Includes GPS antenna, cables for external sensors and power, mounting hardware, installation manual and RacrEye software. For NTSC video (US and Canada) only. Technical specifications Analog composite video in NTSC format, input from camera and output to recorder. Lateral and transverse accelerometers, +/- 2 G's full scale. GPS updates 4 per second, includes WAAS for increased accuracy. Dual tachometer inputs for 12 volt switched signal or coil tap. Built-in real time clock updated by GPS. Modular (6-4) jacks for sensor inputs. Sample rate, 10 per second, 10 bits (0.1% accuracy). Automatic Gain Controlled stereo audio, with built-in microphone. Additional audio inputs for extra microphone or radios. Filtered/regulated power for camera, 2.1mm jack. BNC connector for camera video input. RCA phone jacks for connection to recorder. Requires 12 volt dc power (10 to 18 volts), less than 0.5 amp. Size - 7.5" wide by 3" hign by 4" deep including mounting bracket. Weight - approximately 1 pound.